Question 1

Q : What kind of gloves can we use?

Accepted Answer

A :  Clean vinyl or pvc gloves can be used.

Question 2

Q : How to clean and wash UV-LED resin stuffs ?

Accepted Answer

A : UV-LED resin stain can easily wipe out with alcohol, nail remover or acetone.  In addition to cleaning your reusable tools like silicone brushes, mixing cups, tweezers from resin stain, wash these stuffs with soapy water.

Question 3

Q : How to remove resin when mess up at my clothes, my desk?

Accepted Answer

A : keep these mess stuff out from UV light to avoid curing process, wipe resin stain with alcohol, nail remover or acetone then wash again with soapy water.

Question 4

Q  : Is it OK to wear the cure UV-LED resin as an accessories?

Accepted Answer

A : Yes, you can use UV-LED hard type and soft kind to cure the accessories totally. Skin irritation (in vitro test) and sensitization were used to confirm the safety of the product on the skin (human patch test).. Perform a preliminary patch test if you are sensitive or allergic to resin.

Question 5

Q : Does UV-LED resin have heat resistance?

Accepted Answer

A : When UV-LED resin once entirely dry  . It has heat resistance, allowing it to tolerate temperatures of up to about 100°C. To using UV-LED resin complete objects with hot stuff is fine but not recommend to put them in microwave.

Question 6

Q : Does jewel and melon resin resist to yellowish ? How long last ?

Accepted Answer

A : Both resin are non-yellowing resistant but melon is better to against the yellowing than jewel 3X !

Question 7

Q : Can we mix Jewel and melon resin together ?

Accepted Answer

A : Yes, you may combine the two. Varying resin formulas may cure at different speeds and temperatures, so stir them thoroughly before using to avoid shrinkage and misshapen items and  may cure slower, and the non-yellowing resistant may be decreased. So that, we do not recommend doing that. But you can use them both like mold craft with Jewel Resin (cause it's cheaper) and final coating them with Melon resin (becuase melon give more silkiness

Question 8

Q : Why do you not recommend to use HIGH power of UV-LED lamps ?

Accepted Answer

A :  Using UV lamps or UV-LED lamps with high wattage might cause your work to overheat, boil, and become deformed, as well as increase your electric bill. It’s  therefore sufficient to use UV-LED lamps  from 6W to 86W.

Question 9

Q : How long last Chulimare resin can store ?

Accepted Answer

A : Chulimare's Resin has a shelf life after peeling off bottle seal about 1-1.5 year.  But if you kept it  longer, please test it before using, pouring some resin out to see texture of its liquid  non-sticky, and free of color or muck. If it is, it is still useable.
Store in cool (8-28"c) and dry place
Prevent resin from children and pet 
Close the cap tightly after use.

Question 10

Q : Can I mix epoxy resin colorant in UV-LED resin ?

Accepted Answer

A : Yes, but very tiny amount of colorants. UV-LED resin can mix with colorants in 3 types :  UV colorants, mica powders and gel nail polish and DO NOT mix colorants over 10% of resin amount. If you mix colored too much, it won't cure.

FAQ's

Frequently asked questions